there are always unforseen issues and growing pains. Let me know what you run into...

-So far i've encountered a couple tight threads- caused by the thickness of the anodizing layer. easily remedied by lubing up a bolt and running it through a couple times GENTLY.

-one report of Meus 1.0 pins not clamping tight.  I havent been able to replicate at this point- will test later. Please let me know of any and all tire issues so I can build a compatibility list. On 1.3 tires the jig isnt necessary- just lop off the bead. On 1.0 the jig is only necessary if you want a tight sidewall- if you like a little ballooning just lop off the bead. 

one report of tight holes in spacers. could be laser cutting inconsistency. Spacers are the same as they've been for a year and a half but- this is the first time i'm not running the hub bolts in myself so y'all get to experience things raw..  If they are just slightly tight...run a bolt through. If they are REALLY tight and bind up then let me know and i'll have another batch cut.